top of page

MINIMIX 3 Port Manual Mixing Valve

 

The 3 and 4 way Minimix compact mixers are suitable for smaller and medium-sized warm water central heating systems. They can be used for manual or motor control. They form a compact unit combined with the SM 4.6 ServoMotor.

The mixing valve casing, cover, drive shaft and lid are made of brass. Specially profiled outlets guarantee linear temperature characteristics. Two EPDM O rings seal the shaft. In the case of the 4 way mixer, the supply side is variable, the mixers can be installed at an angle of 45° for connection to a distributor. The equipment is delivered with boiler supply from the left.

The 3 way mixer is used for straight through flow. The return flow can be connected to the right or left. The mixer is delivered with the return on the left.

 

MAXIMIX 3 Port Manual Mixing Valve

 

The 3 and 4 way Maximix compact mixers are suitable for medium-sized and larger warm water central heating systems, and are available in bore widths DN 40 and DN 50. They can be used for manual or motor control. They form a compact unit combined with the SM 4.10 ServoMotor.

The mixing valve casing, cover, drive shaft and lid are made of brass. Specially profiled outlets guarantee linear temperature characteristics. Two EPDM O rings seal the shaft. In the case of the 4 way mixer, the supply side is variable, the mixers can be installed at an angle of 45° for connection to a distributor. The equipment is delivered with boiler supply from the left.

The 3 way mixer is used for straight through flow. The return flow can be connected to the right or left. The mixer is delivered with the return on the left.

MINIMIX/MAXIMIX 3 Port Manual Mixing Valve

50,85£Preis
  • Technical Data

    MINIMIX
    Max. operating temperature 110°C
    Max. operating pressure: 10 bar
    Casing Brass MS 58
    Spindle seals two EPDM O rings
    Torque 0,3 Nm
    Adjustment range 90°
    Motor drive a WITA SM 4.6 servomotor can be easily connected

     

    MAXIMIX

    Max. operating temperature 110°C
    Max. operating pressure 10 bar
    Casing Brass MS 58
    Spindle seals two EPDM O rings
    Torque 0,4 Nm
    Adjustment range 90°
    Motor drive a WITA SM 4.10 servomotor can be easily connected

     

bottom of page